Wireless Charger Guide

Your Blaze Wireless Charger clips straight onto the smart lid and charges it anywhere, no cable needed.

1. Charge it first

Charge the charger fully over USB-C before you use it the first time. Cable not included.

2. Open the plug

Pull the silicone plug on the side of your lid out and let it hang down, tilted slightly to the right. That lines it up with the groove inside the charger.

3. Clip it on

Seat the plug in the groove and push the charger straight in until the clips sit over the rim of the lid.

Using a Performance Tumbler (sleeved cup)? Unscrew the lid and charge it on its own, or charge it on your regular Blaze cup.

4. Battery lights

  • 4 lights: 75–100%
  • 3 lights: 50–75%
  • 2 lights: 25–50%
  • 1 light: under 25%. Time to recharge.

5. Unclip

Pull the charger straight out, then push the silicone plug back in to keep water out of the lid.

Care & safety

  • Use it only with the Blaze smart lid.
  • Keep it dry. Take it off before you wash your bottle.
  • Keep it away from heat and freezing cold.
  • Don’t drop, crush, open or puncture it.
  • Stop using it if it swells, gets hot or smells.
  • Keep it away from children. Recycle it as a lithium-ion battery.

Questions? Email us at support@blazewearables.com.

Contact form